The specifications of MODEL:08-E3-177 3L plating tank group are listed as follows:
1. Tank body: 3L transparent acrylic plating tank is a conjoined type of electrical control box.
- Maximum outer diameter of the whole machine: 480L*225W*385Hmm
- Diameter in the operating room: 150L*90W*200Hmm (liquid height 130Hmm/3L)
- liquid volume (including filter chamber): 4.5L
2. Temperature control mode:
- Temperature control meter: 48×48mm touch button electronic digital type, automatic On-0ff adjustment and P.I.D automatic calculation function.
- Induction rod: PT100 type, 6mm titanium outer tube, induction wire with a quick connector.
- The accuracy of P.I.D automatic calculation can reach ±0.1°C
- Heating rods: 2 quartz transparent heating rods, 9φ ×185mm heating element 250W/110V, tank plate embedded installation.
- The heating rod can be made separately.
- Cooling type is customized (cost not included)
3. Filtration method:
- One shaft seal PUMP, linked to the filter chamber filter, forming a double effect of overflow (Over Flow) and filtration.
- Filter size: 60Lmm×10u.
- The liquid stirring pipe is attached to the tank and the filter pipeline is connected to form a liquid stirring effect.
4. Air stirring system:
- Air PUMP in the electrical control box; The two channels are located at the bottom of the trough, and the wind aperture is 0.8φ~1φ.
5. Transmission system:
- one transmission motor (AC110V).
- One set of transmission group.
- Motor holder in one type.
- A set of motor speed control box.
6. Other accessories:
- Two titanium blues.
- Two anode bags.
7. Electrical Box:
- Electric AC110V movable power connector.
- Set up power supply, fan, temperature control and other switches and power indicators.
- The main switch of each system is a light switch. (The heating rod can be controlled individually).
8. 1 water tray:
- outer diameter: 525L×300W×25Hmm.
- Made of 5Tmm PVC.
9. Cathode fixture frame, workpiece fixture:
- customized, additional cost.
