The specifications of MODEL:08-D10-59 10L plating tank group are listed as follows:
1. Tank body: 10L transparent acrylic plating tank is a conjoined type of electrical control box.
- The maximum outer diameter of the whole machine: 800L*260W*360Hmm
- Diameter in the operating room: 250L*220W*270Hmm (liquid height 200Hmm/10L)
- liquid volume (including filter chamber): 12.5L
Second. Temperature control mode:
- Temperature control meter: 48×48mm touch button electronic digital type, self-On-Off adjustment and P.I.D automatic calculation function.
- Induction rod: PT100 type, φ6mm titanium outer tube, induction wire with a quick connector.
- The accuracy of P.I.D automatic calculation can reach ±0.1°C
- Heating rods: 3 quartz transparent heating rods, 9φ ×250mm heating element 250W/110V, tank plate embedded installation.
- The heating rod can be made separately.
Three. Filtration method:
- One shaft seal PUMP, linked to the filter chamber filter, forming a double effect of overflow (Over Flow) and filtration.
- Filter size: 65Lmm×10u.
- The liquid stirring pipe is attached to the tank and the filter pipeline is connected to form a liquid stirring effect.
Four. Automatic water level control:
- with one stainless steel column (S.T. 306#).
- Acrylic cylinder 120φmm (capacity 800c.c.).
- Automatic hydration.
Five. Air stirring system:
- Air PUMP in the electrical control box; The two channels are located at the bottom of the trough, and the wind aperture is 0.8φ~1φ.
Six. Transmission system:
- one transmission motor (AC110V).
- One set of transmission group.
- Motor holder in one type.
- A set of motor speed control box.
Seven. Other accessories:
- Two titanium blues.
- Two anode bags.
Eight. Electrical Box:
- Electric AC110V movable power connector.
- Set up power supply, fan, temperature control and other switches and power indicators.
- The main switch of each system is a light switch. (The heating rod can be controlled individually).
Nine. 1 water tray:
- outer diameter: 720L×300W×25Hmm.
- Made of 5Tmm PVC.
Ten. Cathode fixture frame, workpiece fixture:
- customized, additional cost.
